1. Manuals
  2. Brands
  3. SCHURTER Manuals
  4. Cables and connectors
  5. 4710-5
  6. Mounting instruction

SCHURTER 4710-5 Mounting Instruction

Appliance outlet
Hide thumbs
1
2
3
4
5
6
7

Advertisement

Table of Contents

Mounting Instruction
Mounting Instruction
4710-5 Appliance Outlet
4710-5 Appliance Outlet
CONTENT
CONTENT
1
1
GENERAL .......................................................................................................................................... 1
GENERAL .......................................................................................................................................... 1
2
2
WIRES FOR IDC-CONTACTS............................................................................................................ 1
WIRES FOR IDC-CONTACTS............................................................................................................ 1
3
3
SOLID WIRE ASSEMBLY WITH THE COVER .................................................................................. 2
SOLID WIRE ASSEMBLY WITH THE COVER .................................................................................. 2
4
4
SOLID WIRE ASSEMBLY WITH A FORCE FITTING TOOL ............................................................. 3
SOLID WIRE ASSEMBLY WITH A FORCE FITTING TOOL ............................................................. 3
5
5
LIGHT PIPE ASSEMBLY ................................................................................................................... 6
LIGHT PIPE ASSEMBLY ................................................................................................................... 6
1
1

General

General
Before assembling the 4710-5 IDC-contacts with the proper wire gauge, make sure that the contacts are
Before assembling the 4710-5 IDC-contacts with the proper wire gauge, make sure that the contacts are
clean and not twisted.
clean and not twisted.
To connect the solid wires into the IDC contacts
To connect the solid wires into the IDC contacts
the outlet should be placed on a flat surface where a force for 3 wires of up to 800 N can be applied.
the outlet should be placed on a flat surface where a force for 3 wires of up to 800 N can be applied.
Depending on the wire style (cross-section, insulation), the press-in force for one solid wire is between
Depending on the wire style (cross-section, insulation), the press-in force for one solid wire is between
150 - 250 N. Therefore, the force for three wires may reach 750 N.
150 - 250 N. Therefore, the force for three wires may reach 750 N.
1) IDC contacts according to IEC 60998-2-3, type "r"
1) IDC contacts according to IEC 60998-2-3, type "r"
2
2

Wires for IDC-contacts

Wires for IDC-contacts
4710-5111-XXXX-XXX-XX00
4710-5111-XXXX-XXX-XX00
4710-5Y11-XXXX-XXX-XX00
4710-5Y11-XXXX-XXX-XX00
4710-5222-XXXX-XXX-XX00
4710-5222-XXXX-XXX-XX00
4710-5Y22-XXXX-XXX-XX00
4710-5Y22-XXXX-XXX-XX00
4710-5333-XXXX-XXX-XX00
4710-5333-XXXX-XXX-XX00
4710-5Y33-XXXX-XXX-XX00
4710-5Y33-XXXX-XXX-XX00
Insulation
Insulation
For America: According to UL 758
For America: According to UL 758
For Europe:
For Europe:
According to IEC 60228
According to IEC 60228
Outer diameter shall not exceed Ø 4.5 mm
Outer diameter shall not exceed Ø 4.5 mm
Product Documentation
owner
creation date
vettersa
17.08.2018
2
2
6.0 mm
6.0 mm
/ 10 AWG
/ 10 AWG
2
2
4.0 mm
4.0 mm
/ 12 AWG
/ 12 AWG
2
2
2.5 mm
2.5 mm
release date
released by
17.08.2018
vettersa
1)
1)
, whether the outlet is already installed in a panel or not,
, whether the outlet is already installed in a panel or not,
Insulated solid wire, single core
Insulated solid wire, single core
(Y: optional type for L, see data sheet)
(Y: optional type for L, see data sheet)
Insulated solid wire, single core
Insulated solid wire, single core
(Y: optional type for L, see data sheet)
(Y: optional type for L, see data sheet)
Insulated solid wire, single core
Insulated solid wire, single core
(Y: optional type for L, see data sheet)
(Y: optional type for L, see data sheet)
Mounting Instruction 4710-5
change order no
rev
page
2016073
B
1 of 7
D10-015-719

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 4710-5 and is the answer not in the manual?

Questions and answers

Related Manuals for SCHURTER 4710-5

Summary of Contents for SCHURTER 4710-5

  • Page 1: Table Of Contents

    LIGHT PIPE ASSEMBLY ........................6 General General Before assembling the 4710-5 IDC-contacts with the proper wire gauge, make sure that the contacts are Before assembling the 4710-5 IDC-contacts with the proper wire gauge, make sure that the contacts are clean and not twisted.

  • Page 2: Solid Wire Assembly With The Cover

    Ensure the cover is in the right position. IDC contacts. The cover must snap-in with the IDC contacts. The cover must snap-in with the body. body. Product Documentation Mounting Instruction 4710-5 owner creation date release date released by change order no...

  • Page 3: Solid Wire Assembly With A Force Fitting Tool

    5) This mounting instruction is valid for 4710-5 cross and 4710-5 along. 5) This mounting instruction is valid for 4710-5 cross and 4710-5 along. 4710-5 cross 4710-5 cross 4710-5 along 4710-5 along Solid w ire assembly w ith a force fitting tool Solid w ire assembly w ith a force fitting tool 1) A force fitting tool can be designed by the customer.
  • Page 4 4710-5 along for 4710-5 along 2) IDC contacts must be clean and not twisted. 2) IDC contacts must be clean and not twisted. 3) Place the wires on the IDC contacts L, N and 3) Place the wires on the IDC contacts L, N and PE.
  • Page 5 7) Plug in the rear cover to the wired socket. The 7) Plug in the rear cover to the wired socket. The cover must snap-in with the body. cover must snap-in with the body. Product Documentation Mounting Instruction 4710-5 owner creation date release date released by...

  • Page 6: Light Pipe Assembly

    8) This mounting instruction is valid for 4710-5 cross and 4710-5 along. 8) This mounting instruction is valid for 4710-5 cross and 4710-5 along. 4710-5 cross 4710-5 cross 4710-5 along 4710-5 along Light pipe assembly Light pipe assembly 1) Mount the light pipe when the 4710-5 is wired 1) Mount the light pipe when the 4710-5 is wired 2) Place the light pipes and push them slightly in.
  • Page 7 4) Make sure that the light pipes are pressed in. 4) Make sure that the light pipes are pressed in. 5) This mounting instruction is valid for 4710-5 cross and 4710-5 along. 5) This mounting instruction is valid for 4710-5 cross and 4710-5 along.

Table of Contents