SCHURTER 4795 Series Assembly Instruction

1. Wiring for 4795 1. Wiring for 4795
Cable Clamp Cable Clamp
Torque Value Torque Value
0.8Nm 0.8Nm
Applicable Cable Types Applicable Cable Types
IEC IEC
Type Type Cable Type Cable Type
H05VV -F 3G H05VV -F 3G
4795 4795
H05RR -F 3G H05RR -F 3G
UL UL
Type Type Cable Type Cable Type
SV... SV...
4795 4795
SJ... SJ...
1) Harmonized wire coding in accordance with IEC60227-5 respectively IEC60245-4. 1) Harmonized wire coding in accordance with IEC60227-5 respectively IEC60245-4.
2) If cord has a length exceeding 2m, nominal cross-sectional areas shall be 1.5mm 2) If cord has a length exceeding 2m, nominal cross-sectional areas shall be 1.5mm
3) Types according to UL 62 which begins with the given letters (i.e. SV... includes SV, SVT, SVE etc.). 3) Types according to UL 62 which begins with the given letters (i.e. SV... includes SV, SVT, SVE etc.).
Operation Manual
owner creation date
vettersa 06.12.2017
20 20
7 7
Cable end sleeves Cable end sleeves
(Optional, not enclosed) (Optional, not enclosed)
Torque Value Torque Value
0.4Nm 0.4Nm
N N blue blue
Yellow / Yellow / green green
L L brown brown
1) 1)
Wire Size Wire Size
2) 2)
min. min. max. max.
2 2
3x 1.00 mm 3x 1.00 mm 3x 1.50 mm 3x 1.50 mm
2 2
3x 1.00 mm 3x 1.00 mm 3x 1.50 mm 3x 1.50 mm
3) 3)
Wire Size Wire Size
min. min. max. max.
3x AWG 16 3x AWG 16 3x AWG 16 3x AWG 16
3x AWG 16 3x AWG 16 3x AWG 14 3x AWG 14
release date released by
08.08.2019 vettersa
4795-01XX: cut for 4795-01XX: cut for
cables over Ø 8.5 mm cables over Ø 8.5 mm
Cable guard Cable guard
N N
IN IN PE PE
L L
Cable Ø Cable Ø
max. max.
2 2
10.4mm 10.4mm
2 2
10.4mm 10.4mm
Cable Ø Cable Ø
max. max.
10.4mm 10.4mm
10.4mm 10.4mm
2 2
or more. or more.
Wiring for 4795
change order no rev page
2013669 E 1 of 2
Torque Value Torque Value
0.5Nm 0.5Nm
N' N'
PE' PE' OUT OUT
L' L'
0115.0048