SCHURTER 9009 Quick Start Manual

1. Wiring for 9009

1. Wiring for 9009
Torque Value Torque Value
0.8Nm 0.8Nm
Applicable Cable Types Applicable Cable Types
IEC IEC
Type Type Cable Type Cable Type
H05VV -F 3G H05VV -F 3G
9009 9009
H05RR -F 3G H05RR -F 3G
UL UL
Type Type Cable Type Cable Type
SV... SV...
9009 9009
SJ... SJ...
1) Harmonized wire coding in accordance with IEC60227-5 respectively IEC60245-4. 1) Harmonized wire coding in accordance with IEC60227-5 respectively IEC60245-4.
2) If cord has a length exceeding 2m, nominal cross-sectional areas shall be 1.0mm 2) If cord has a length exceeding 2m, nominal cross-sectional areas shall be 1.0mm
3) Types according to UL 62 which begins with the given letters (i.e. SV... includes SV, SVT, SVE etc.). 3) Types according to UL 62 which begins with the given letters (i.e. SV... includes SV, SVT, SVE etc.).
Operation Manual
owner creation date
vettersa 06.12.2017
Cable Clamp Cable Clamp
(turn for Ø > 6.8 mm) (turn for Ø > 6.8 mm)
Cable end sleeves Cable end sleeves
(Optional, not enclosed) (Optional, not enclosed)
Torque Value Torque Value
0.8Nm 0.8Nm
L L brown brown
Yellow / Yellow /
N N blue blue
1) 1)
Wire Size Wire Size
2) 2)
min. min. max. max.
2 2
3x 1.00 mm 3x 1.00 mm 3x 1.50 mm 3x 1.50 mm
2 2
3x 1.00 mm 3x 1.00 mm 3x 1.00 mm 3x 1.00 mm
3) 3)
Wire Size Wire Size
min. min. max. max.
3x AWG 18 3x AWG 18 3x AWG 16 3x AWG 16
3x AWG 18 3x AWG 18 3x AWG 14 3x AWG 14
release date released by
09.08.2019 vettersa
25 25
7 7
Cable guard Cable guard
green green
N N
IN IN PE PE
L L
Cable Ø Cable Ø
max. max.
2 2
10.0mm 10.0mm
2 2
10.0mm 10.0mm
Cable Ø Cable Ø
max. max.
10.0mm 10.0mm
10.0mm 10.0mm
2 2
/16AWG or more. /16AWG or more.
Wiring for 9009
change order no rev page
2013669 G 1 of 2
9009-01XX-XX: Cut 9009-01XX-XX: Cut
for cables over Ø for cables over Ø
8.5 mm 8.5 mm
Torque Value Torque Value
0.4Nm 0.4Nm
N' N'
PE' PE' OUT OUT
L' L'
0115.0059