Lexmark T430 Technical Reference page 9

1-2
Introduction
Chapter 2: "PCL Emulation"
Shows how to select PCL emulation and discusses PCL emulation commands, GL/2
commands, and resident font and symbol set support.
Chapter 3: "Printer Job Language"
Contains detailed information about certain commands that cause the printer to enter
PCL emulation, PostScript emulation, and Personal Printer Data Stream (PPDS), and
many other types of commands.
Chapter 4: "PostScript Emulation"
Provides information about PostScript emulation and explains PostScript emulation
supplemental operators.
Chapter 5: "Switching Languages"
Describes ways to switch printer languages and explains when you may want to
choose one method over another.
Chapter 6: "Flash Memory and Disk"
Provides information about using the flash memory and hard disk. It describes how to
manage printer memory, store resources (such as fonts and macros), and manage
files.
Chapter 7: "Printer Specifications"
Lists printer specifications, including information about hardware and environmental
conditions.
Chapter 8: "Printer Interfaces"
Provides information on printer interfaces, including information about parallel and
serial interface, network support, and communication protocols.
See the tables in the three appendixes to determine if your printer supports a
particular PCL emulation, PJL, or PostScript emulation command. The appendixes
are: