Installing Lan Driver - Acorp 4845GLQ Manual

Chapter 3

3.7 Installing LAN Driver

To install VT6105 LAN driver, please quit the Driver CD pro-
:
vided with the Motherboard, and follow the procedures stated be-
low (Windows 9X is taken for illustration of LAN driver setup
herewith:
(1) On the "Start" screen of Win9X, please click the
mouse to the following path:
\My Computer\properties\Device Manager
(2) In the "Device Manager screen, point to the
"Ethernet Controller" item with the mouse and
double click on it (or click on the "Properties"
button).
(3) Click to the "General" bar.
(4) Click to the "Reinstall Driver" button to continue.
(5) When the screen on the
left pops out, insert the
Drivers CD into CD-
ROM and key in the
correct path for LAN
driver setup and then
click to "Next" button:
E:\MB\Lan_driver\vt6105
(supposing the CD-ROM
drive is E.)
(6) The Setup program will
then guide you through
the rest of the installa-
tion until the screen on
the left pops out to
prompt you to restart
system. Only if the sys-
tem is restarted will the
LAN driver be able to
take effect.
4845GLQ Drivers & Utilities
3-76