Lexmark Optra W810 Setup Manual page 158

Note:
Before printing the
menu settings page, make sure
the Paper Type setting for the
source is Plain Paper. Tray 2 is
the factory default paper
source, and Plain Paper is the
default Paper Type for that tray.
146
Verify setup
3
If you need to change the language of the text displayed
on the operator panel, complete the following steps:
a
Press the
Menu>
the second line of the operator panel display.
b
Press the
Select
c
Press until
<Menu
ond line of the display.
d
Press .
Select
e
Press until the language you prefer appears on
Menu>
the second line of the display.
f
Press .
Select
The printer resets and displays text in the requested
language.
g
Press .
Return
4
Press and release
5
Press the button.
Select
is then displayed on the first line
UTILITIES MENU
6
Press until you see
Menu>
the display.
7
Press to print the page.
Select
The message
Printing Menu Settings
returns to status after the menu settings page prints.
Ready
If an error message appears on the display, refer to the User's
Reference for more information.
8
Verify that the options you installed are listed on the menu
settings page under "Installed Features."
If an option you installed does not appear on the page, turn the
printer off, unplug the power cord, and reinstall the option.
9
If you attached a serial cable, verify that the printer serial
settings listed on the menu settings page are appropriate
for your system.
button until you see
button.
appears on the sec-
Display Language
until you see
Menu>
on the second line of
Print Menus
is displayed. The printer
on
SETUP MENU
.
UTILITIES MENU
.