Breaking In (Running In) Engine - Yamaha D150H Owner's Manual

EMU00219
BREAKING IN (RUNNING IN)
Your new engine requires a period of
break-in (running-in) to allow mating sur-
faces of moving parts to wear-in evenly.
Correct break-in (running-in) will help
ensure proper performance and longer
engine life.
cC
8 Failure to follow the break-in (running-
in) procedure may result in reduced
engine life or even severe engine dam-
age.
8 Premix fuel must be used during break-
in (running-in) in addition to oil in
YAMAHA AUTOLUBE SYSTEM.
Break-in (running-in) time:
10 hours
Break-in (running-in) premix ratio
Gasoline (Petrol) : Engine oil = 50 : 1
EMU00225
Gasoline (Petrol)/ Engine oil mixing chart
Mixing ratio
Gasoline (Petrol)
(0.26 US gal, (3.2 US gal, (3.7 US gal, (6.3 US gal,
0.22 Imp gal) 2.6 Imp gal) 3.1 Imp gal) 5.3 Imp gal)
0.02 L
Engine oil
(0.02 US qt, (0.26 US qt, (0.30 US qt, (0.51 US qt,
0.02 Imp qt) 0.21 Imp qt) 0.24 Imp qt) 0.42 Imp qt)
cC
Make sure to mix gasoline (petrol) and oil
completely, otherwise your outboard
motor may be damaged.
3-8
ENGINE
50 : 1
1 L 12 L 14 L
0.24 L 0.28 L
GB
24 L
0.48 L