Step 3: Load Print Material - Lexmark Optra T522 Setup Manual

Step 3: Load print material

Length guide
lever
Paper size indicators
.
Paper capacity
mark
Length guide
Complete these instructions to load print material
into any of the standard or optional trays. All paper
Width guide
trays are loaded in the same way.
tab
1
2
3
Width guide
4
Width
guide tab
5
Width guide
6
Remove the paper tray.
Pull the width guide tab and slide the width
guide to the far right side of the tray.
Squeeze the length guide lever and slide the
length guide to the correct position for the
size paper you are loading.
Place the paper into the paper tray with the
recommended print side face down for
single-sided printing and face up for duplex
printing. Do not fill paper above the paper
capacity mark (fill line).
Pull the width guide tab and slide the width
guide to the left until it lightly rests against
the edge of the paper stack.
Reinstall the tray.
17