Table of Contents
Advertisement
10 Configure the basic settings of the camera [Basic]
•
Unlock: The lock function is disabled.
•
Password is set.: The password is configured correctly.
•
Error(Unsupported SD memory card): A card that does not support password lock is inserted. Check
that an SDHC memory card or SDXC memory card is inserted.
•
Error(Password mismatch): The SD memory card cannot be used because the password configured for
the SD memory card and the password configured for the camera do not match. Check that the passwords
are correct.
•
Error(Undefined error): Displays when the SD memory card is formatting, locked (write-protected), or
when an error occurs in the SD memory card. Check the SD memory card.
Note
•
The password lock function supports only SDHC memory cards and SDXC memory cards.
•
If you will use the SD memory card on a device other than the camera with password lock configured,
remove the password using the password lock remove button before removing the SD memory card.
The password cannot be removed on devices (such as PCs) other than the camera.
•
When the "Status" of "SD memory card password lock" is "Lock", if an SD memory card with no
configured password is inserted, the password is automatically configured to the SD memory card.
IMPORTANT
•
If you forget the configured password, the password cannot be removed. The SD memory card with
the configured password will become unusable, so manage passwords with great care.
•
If you forget the configured password and you want to replace the SD memory card with a new one,
perform 1 of the following steps to set the "Status" of "SD memory card password lock" to "Unlock"
before replacing the SD memory card.
–
Use the password lock remove button to enter a password and then press the [Set] button. In this
case, even if you enter an incorrect password, the "Status" will change to "Unlock".
–
Initialize settings from the "Maintenance" page (®page 180).
Recording stream 1/Recording stream 2
[Recording format]
Select the type of image data to be recorded on the SD memory card.
"Off" can only be selected for the "Recording format" of "Recording stream 2".
"JPEG(1)", "JPEG(2)", and "JPEG(3)" can only be selected for the "Recording format" of "Recording stream
1".
•
Off: Does not record data.
•
JPEG(1): Records still image data (JPEG(1)). The data is recorded in accordance with the settings of
"JPEG(1)" on the [JPEG/H.264] tab of the "Image/Audio" page.
•
JPEG(2): Records still image data (JPEG(2)). The data is recorded in accordance with the settings of
"JPEG(2)" on the [JPEG/H.264] tab of the "Image/Audio" page.
•
JPEG(3): Records still image data (JPEG(3)). The data is recorded in accordance with the settings of
"JPEG(3)" on the [JPEG/H.264] tab of the "Image/Audio" page.
•
H.264(1): Records video data (H.264(1)) in the MP4 video encoding format. The data is recorded in
accordance with the settings of "H.264(1)" on the [JPEG/H.264] tab of the "Image/Audio" page.
•
H.264(2): Records video data (H.264(2)) in the MP4 video encoding format. The data is recorded in
accordance with the settings of "H.264(2)" on the [JPEG/H.264] tab of the "Image/Audio" page.
•
H.264(3): Records video data (H.264(3)) in the MP4 video encoding format. The data is recorded in
accordance with the settings of "H.264(3)" on the [JPEG/H.264] tab of the "Image/Audio" page.
•
H.264(4): Records video data (H.264(4)) in the MP4 video encoding format. The data is recorded in
accordance with the settings of "H.264(4)" on the [JPEG/H.264] tab of the "Image/Audio" page.
•
Default:
–
Recording stream 1: JPEG(2)
54
Operating Instructions
Advertisement
Table of Contents
