Table of Contents
Advertisement
Notify of alarm occurrences to the designated addresses (TCP alarm
notification)
This function is available only when our device, such as the network disk recorder, is connected to the system.
When "On" is selected for "TCP alarm notification", the connected our device will be notified that the camera
is in the alarm state. The settings for TCP alarm notification can be configured in the "TCP alarm
notification" section of the [Notification] tab of the "Alarm" page. (®page 118)
Notify of alarm occurrences to the designated HTTP server (HTTP alarm
notification)
Alarm occurrence notifications can be sent at an alarm occurrence to the HTTP servers registered in advance.
Up to 5 HTTP servers can be registered as recipients of alarm notifications. The URL sent to HTTP servers
with alarm notifications can be specified. The settings for HTTP alarm notification can be configured on the
[Notification] tab of the "Alarm" page. (®page 120)
4 Action at an alarm occurrence
Operating Instructions
25
Advertisement
Table of Contents
