Temperature Display; Setting The Temperature; Possible Temperature Settings - Miele KD 4050 E el Active Operating Instructions Manual

Temperature display

The temperature display on the control
panel always shows the required tem-
perature.

Setting the temperature

 Press the button for setting the tem-
perature  repeatedly until the tem-
perature you want lights up in the
temperature display for the fridge
section.

Possible temperature settings

- Fridge zone: 2 to 8 °C
The correct temperature
If you change the temperature set-
ting:
 check the temperature display after a
few hours. It will take this long for the
appliance to give an accurate read-
ing.
- Wait for approx. 6 hours if the refri-
geration appliance is not very full
- Wait for approx. 24 hours if the refri-
geration appliance is full
If, after this time, the temperature is still
too high or too low:
 Adjust the temperature again.
35