Error Messages - PR -8837 Manual

Procedures:
Step1: DMX value range for Channel LED brightness calibration is between 50 and 100 with according brightness range
between 50% and 100%.
Step2:DMX value range for Channel LED brightness calibration confirmation is between 0 and 200. If the fader is moved
between 201 and 209 and stays there for more than 5s, the desired brightness value will be stored into fixtures.
Step 3:Move the faders for DMX channels LED brightness calibration and LED brightness calibration confirmation
respectively to zero.
If 100% brightness needed, move the fader for channel LED brightness calibration between 100 and 255 for Step 1and repeat
Step 2 and 3.
Under the menu, confirm Defaults/Restore default, LED brightness will go back to 100%.
8. SIGNS OF THE TOUCH SCREEN
Lamp Control
Chinese/English

Error Messages

Address
Config Settings
9.ERROR MESSAGES
The system can detect some errors during the reset, if
The error messages are as follows:
Name
Pan
Tilt
Cyan
Yellow
Magenta
Color temperature
Reset
Type
Timeout/magnet Sensor/Encoder
Timeout/magnet Sensor/Encoder
Timeout
Timeout
Timeout
Timeout
Option Settings
Information
Service
Operation Mode
User Memories
displayed, touch to view the error.
Check if wiring, positioning parts and motors are normal
Check if wiring, positioning parts and motors are normal
Check if wiring, positioning parts and motors are normal
Check if wiring, positioning parts and motors are normal
Check if wiring, positioning parts and motors are normal
Check if wiring, positioning parts and motors are normal
26
Correction