Table of Contents
Advertisement
FIRMWARE UPGRADE VIAUSB PORT
●
After the .PRS files for upgrade copied to the U flash drive and then it plugged into USB port, the name of the file or its folder will be
seen under the menu of Service/USB Firmware Upgrade . Select the needed PRS file and push the upgrade button, the system will
show Please Waiting while the file being copied into the system. Then the display will show Bootloader interface and within the
countdown of 10S, push both UP and DOWN buttons together, the system will enter into upgrade interface. During the upgrade, do
not disrupt the power. If both bottoms are not pushed within 10s, it won't enter into firmware upgrade interface.
TO SET UP COLOR TEMPEARATUEAND COLOR MACRO
●
A projector has 7 color temperature macros and 89 standard color macros. Color temperatures are for respective
2700K,3000K,3500K,4000K,4500K,5000K and 5700K. Under the DMX channel of CMY macro, color macro and its color
temperature macro can be selected.
TO SET UPDIMMER CURVEAND LED REFRESH FREQUENCY
●
A projector has 4 gamma dimmer curves: gamma 2.0, gamma 2.2, gamma 2.4 and gamma 2.6.
It has 8 LED refresh frequency: LED refresh frequency 1200Hz, LED refresh frequency 2400Hz, LED refresh frequency 4800Hz,
LED refresh frequency 10000Hz, LED refresh frequency 12000Hz, LED refresh frequency 15000Hz, LED refresh frequency
20000Hz and LED refresh frequency 25000Hz.
It has fast, medium and slow dimmer speeds.
Its setups are as follows:
1.
Hold the OK button for more than 3s to unlock the control panel and then push
"Option Settings".
2.
Select "Dimmer Settings" and select any mode of gamma curve /LED frequency /dimmer speed for adjustment.
FAN SPEED MODES
●
It has standard and theater modes. Theater mode is quiet mode.
Its setups are as follows:
1.
Hold the OK button for more than 3s to unlock the control panel and then push
"Option Settings".
2.
Select either of Standard and theater modes after the menu of Fan Settings.
PROJECTOR TYPE
●
It has 3 modes of moving head light, fixed focus profile light and zoom profile light.
For moving head light: linear zoom 6
For fixed focus profile light, it has 6 beam angles: 6°、 10°、 19°、 26°、 36°、 50°. After the beam angle selected, zoom lens can't
move and the light spot can be focused via focus lens;
For zoom profile light, it has 3 bean angle ranges: 6-15°、15-35°、35-54°. If the beam angle range selected, zoom lens can
move in the exact range accordingly and the light spot be focused via focus lens.
For fixed focus profile light and zoom profile light, it can enter into quiet theater mode automatically.
The setups are as follows:
1.
Hold OK key for more than 3s to unlock control panel. After unlocking the control panel, push
menus and select "Options Settings"
2.
Select the projector type after entering into the menu of "Light Type"
AUTO-FOCUS SETUP
●
A projector has auto-focus function for the distance ranges of 5m,10m,15m and 20m respectively. While any of Iris, Framing Blade,
Fixed gobo wheel and Rotating Gobo Wheel is in use, Auto-Focus channel for specified distance can automatically focus the image.
° -54 °, standard fan mode ;
► button to enter into the menus and select
► button to enter into the menus and select
10
►button t o enter into operation
Advertisement
Table of Contents
