Brightness Calibration; Operation Menu - PR -8837 Manual

Then use Auto-Focus Calibration channel to fine tune the focused image. Priority sequence: Rotating gobo wheel>Fixed gobo
wheel>Iris>Framing blades

BRIGHTNESS CALIBRATION

●
For brightness calibration function, a controller can be used on the projectors in a DMX chain or a projector be done individually.
After running for some time, the projectors need to be recalibrated in brightness for conformity with the help of LED brightness
calibration channel via controller. The function has the following characteristics:
1. LED brightness calibration channel has 50 levels for adjustment with each level meaning power consumption decreases by 1%.
2. Calibration can be done on projectors in a DMX chain or a single one. After calibration done on a lot of projectors in a DMX
chain, it can be done individually also if needed.
3. To avoid erroneous operation, after the fader of a DMX controller is at proper place for LED BRIGHTNESS CALIBRATION
channel, the fader for channel of LED BRIGHTNESS CALIBRATION CONFIRMATION channel should be at right DMX
value range to save parameters. The calibration is completed after the desired parameters are store d into the projectors.
CRI MODE
●
It has HIGH CRI MODE and select it via DMX controller to activate it. The mode ensures high CRI optical effect.

6. OPERATION MENU

1st LEVEL 2nd LEVEL
DMX Address
IP Address
Address
SubNet Mask
ArtNet
ArtNet Universe
sACN Universe
Total Reset
Pan&Tilt Reset
Colour System Reset
Reset
Gobo Reset
Zo.Fo.Fr.Pr. Reset
Other Reset
DMX Channel Mode
Config Settings
Signal Select
Loss of DMX
Display Config
3rd LEVEL
1-466（Short Mode）
1-461（Standard Mode）
1-446（Extended Mode）
Default IPAddress
Custom IPAddress
X.X.X.X
0-255
1-63999
Really Reset?
Really Reset?
Really Reset?
Really Reset?
Really Reset?
Really Reset?
Short Mode 47CH
Standard Mode 52CH
Extended Mode 67CH
View Selected Mode
XLR Only
XLR First
Wireless Only
Wireless First
Wireless In/XLR Out
Artnet Only
Artnet In/XLR Out
sACN Only
sACN In/XLR Out
Normal time out
Hold last Value
Display Mode
11
4th LEVEL
2.X.X.X /10.X.X.X
X.X.X.X
Confirm/ Cancel
Confirm/ Cancel
Confirm/ Cancel
Confirm/ Cancel
Confirm/ Cancel
Confirm/ Cancel
Strobe
.....
OffAfter Delay
OnAlways
5th LEVEL