Installing The Wall Mount Bracket - Hisense 65U9HAU Quick Setup Manual

Installing the Stand or Wall Mount Bracket
9. Use four screws(M5×16) to secure
the assembled Base Stand to the
TV tightly.
10. Now, the installation is finished. You can place the TV on a flat surface, and tear
off all protective film on TV.

Installing the Wall Mount Bracket

Before mounting the TV, remove the TV stand if you have already attached it, and make
sure the wall mount bracket supports the weight of your TV.
CAUTION
When mounting the TV on a wall, follow instructions provided with the wall mount bracket. If
it is not correctly mounted, the TV may fall and cause property damage or personal injury.
Place spacers between the TV and bracket.
Standard dimensions are shown below.
Wall mount hole pattern (mm)
Wall mount screw size
Rear cover of the TV
We do not recommend hanging the TV on a slanted wall, and
when wall mounting make sure your television remains parallel to
the wall and does not lean forward.
NOTES
The diameter and length of the screws differ depending on the wall mount bracket model.
Wall mount bracket is optional, your device may not have wall mount bracket, please
refer to the actual accessories.
400 × 400(65")
600 × 400(75")
M6(65")
M8(75")
9.5 - 11.5 mm
Wall Mount Bracket
Wall Mount Screw
Wall Mount Spacer
6
4 Screws
(M5×16)
Vertical
surface
TV
screen