Advertisement
Requires use of a Bose Tile Bridge or Rough-in Pan.
Be sure to observe all local building codes
With use of direct input terminals
With use of the ceramic terminals
® The FreeSpace DS 16F loudspeaker has passed extensive testing and complies with the following specifications and uses:
Listed to ANSI/UL 1480-2005
EMC Directive 89/336/EEC and Article 10 (1) of the directive, EN50081-1 and EN50082-1 as signified by the CE mark.
The DS 16F also has been designed to the requirements defined in the following European regulatory specifications for combination systems:
UL Sensitivity Wattage Tap Sound Pressure Level dBA at 3.1 meters (10 feet):
Wattage | ANSI/UL 1480-2005 | |
Tap | 70V | 100V |
1 Watt | 72 dBA | - |
2 Watt | 75 dBA | 75 dBA |
4 Watt | 79 dBA | 79 dBA |
8 Watt | 81 dBA | 81 dBA |
16 Watt | 83 dBA | 83 dBA |
8 Ohm | 84dBA |
SPLs given are per the UL 1480 specified reporting method.
Frequency response:
Fire alarm: 400 Hz to 4 kHz
General Signaling: 80 Hz to 16 kHz (±3 dB)
The Declaration of Conformity for this product can be found at www.bose.com/static/compliance/index.html.
Wire gauge
The FreeSpace DS 16F loudspeaker is designed to work with 18 AWG (0.8 mm2) to 14 AWG (2.0 mm2) size wire only.
©2007 Bose Corporation, The Mountain
Framingham, MA 01701-9168 USA
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the FreeSpace DS 16F and is the answer not in the manual?
Questions and answers