Bose SURROUND SPEAKERS Manual
Also See for SURROUND SPEAKERS:

Advertisement

Bose SURROUND SPEAKERS Manual

START HERE

Choose your setup method
Your setup method depends on which soundbar you have.
Bose Soundbar 500, Bose Soundbar 700, or Bose Smart Soundbar 300: See method 1.
SoundTouch 300 soundbar: See method 2.

METHOD 1

BOSE SOUNDBAR 500, BOSE SOUNDBAR 700, BOSE SMART SOUNDBAR 300

www.apple.com

play.google.com

Set up using the Bose Music app

  1. In the Bose Music app, from the My Products screen, select your soundbar.
  2. Go to the Settings menu to add your surround speakers.

New to Bose Music app?
Download the app and follow the app instructions to set up your soundbar and surround speakers.

METHOD 2

SOUNDTOUCH 300 SOUNDBAR

Connect your adapters

  1. Insert the color-coded speaker cable wires into their corresponding terminals.
  2. Turn the screws to the right (clockwise) to secure the wires into the terminals.
  3. Repeat steps a and b to connect your other adapter.

Identify switch settings on wireless receivers

  1. Confirm that the switch on one wireless receiver is set to R (right).
  2. Confirm that the switch on the other wireless receiver is set to L (left).

Connect your adapters

Setup Method 2 - Step 1 - Connect your adapters

  1. Insert the adapter into the back of the speaker.
  2. Insert the two-pin connector into the wireless receiver.
  3. Repeat steps 1 and 2 to set up your other speaker.

Place your rear speakers and wireless receivers

Setup Method 2 - Step 2 - Place your rear speakers

  1. Facing your TV, place the speaker and R wireless receiver on the right side of your room.
  2. Facing your TV, place the speaker and L wireless receiver on the left side of the room.
  3. Connect to power.

Connect the surround speakers to the soundbar

  1. On your SoundTouch 300 remote, press .
  2. Press and hold 7 until on the soundbar blinks white.
    Once the surround speaker connects, you hear a tone and glows white.
    NOTE: Connecting may take several minutes.

Set up ADAPTiQ audio calibration

Setup Method 2 - Step 3

  1. Connect the ADAPTiQ headset (included with the soundbar) to the soundbar's ADAPTiQ connector.
  2. Put the headset on your head.

Run ADAPTiQ audio calibration

  1. On your SoundTouch 300 remote, press .
  2. Press and hold 8 until and on the soundbar glow green.
    NOTE: To cycle through languages, press and on the navigation pad.

worldwide. Bose.com/Support/WSS

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Bose SURROUND SPEAKERS Manual

Advertisement

Need help?

Need help?

Do you have a question about the SURROUND SPEAKERS and is the answer not in the manual?

Questions and answers

Table of Contents