Table of Contents
Advertisement
Getting Started
This instruction manual explains the basic instruction for operating this unit. Unless
otherwise stated, all operations described are based on remote control use.
Powering ON/OFF
Press the Y/VOLUME dial on the unit or Y button on remote control to switch the unit on.
1.
Press the Y/VOLUME dial on the unit or Y button on remote control to switch the unit back to standby
2.
mode.
Selecting Modes
Press MODE button on unit or remote control to access Mode Menu. Turn the SCROLL/SELECT dial on unit
or press S / 8 buttons on remote control to select, then press SCROLL/SELECT dial on unit or SELECT
button on remote control to switch between Internet Radio, Podcasts, Spotify, Music Player, DAB
Radio, FM Radio, Bluetooth Audio and AUX In modes.
When the unit is idle for approximately 15 minutes, it will automatically switch to standby.
To switch the unit off completely, remove the mains plug from the main socket.
Please turn the unit off completely to save energy when not in use.
Adjusting the Volume
- Turn the Y/VOLUME dial on the unit or press the VOL +/– buttons on the remote control to adjust the
volume.
- If you wish to turn the sound off, press the MUTE button on the remote control. Press the MUTE button
again, turn the Y/VOLUME dial on the unit or press the VOL +/– buttons on the remote control to
resume normal listening.
Navigating the Menu
1.
Press MENU button on the unit or remote control to access the menu.
Turn the SCROLL/SELECT dial on the unit or press ▶" ^/▼ □ buttons on the remote to select your
2.
choice.
3.
Press the SCROLL/SELECT dial on the unit or SELECT button on the remote control to confirm your
selection.
Initial Set-Up
When you first connect the unit to the mains socket, the display will show the
welcome screen then with language menu shown up, turn SCROLL/SELECT
dial on unit or press ▶" ^/▼ □ buttons on remote control to change the
display language of your choice and press the SCROLL/SELECT dial on unit or
SELECT button on remote control to confirm.
When the privacy policy page will come up, please visit the website
mentioned in the page for the details of the privacy policy. Press SCROLL/
SELECT dial on unit or SELECT button on remote control to accept for next
step.
To launch the initial Setup wizard, turn the SCROLL/SELECT dial on the unit or S / 8 buttons on
1.
remote control to select [YES], then press the SCROLL/SELECT dial on the unit or SELECT button on
the remote control to confirm.
2.
In the next step you can select the time format. Select the desired setting [12] or [24] and press the
SCROLL/SELECT dial on the unit or SELECT button on the remote control to move on to the next step.
GB-5
Advertisement
Table of Contents
