Table of Contents
Advertisement
Auxiliary Input
You can play sound from an external device via the device:
1.
Connect the external device to the Analogue Audio Input on the device through suitable AUX cable
(not include).
Press MODE button on unit or remote control to access Mode Menu. Turn the SCROLL/SELECT dial on
2.
unit or press S / 8 buttons on remote control to select AUX In mode, then press SCROLL/SELECT
dial on unit or SELECT button on remote control to confirm.
Turn the Y/VOLUME dial on the unit or press the VOL +/– buttons on the remote control to adjust the
3.
volume control for your desired sound output level. Set the desired volume on the radio and the
external audio device if necessary.
4.
In AUX mode, operate your audio device directly for playback features.
When connecting the external audio device, refer to the owner's manual of the external
device.
NetRemote
The device gives a feature of NetRemote by smartphone or tablet in iOS or Android system. By
downloading the assigned app named UNDOK, you can view all the modes of Internet Radio, Podcasts,
Spotify, Music Player, DAB, FM, Bluetooth and AUX In. Search UNDOK from Google Play or Apple Store
for UNDOK app, and install it to your smartphone or tablet.
Before using the UNDOK app, make sure the device and the smartphone or tablet are in the same WiFi
network. Launch the app.
The app initializes and scans for the device in the network. Tap the device to make the NetRemote
connection.
- Once the smartphone or tablet has already accessed the device, they will automatically connect the next
time when you open the app again.
- Be aware that if another smartphone or tablet with the app in the same network has access with the
device; the original connection will be cut off.
When it is the first time that you connect the device to the unit, the app may ask you to enter the PIN.
Default PIN is 1234. For details of changing the PIN for security,
please refer to System Settings section: Network - NetRemote PIN Setup.
Select your desired mode in the main page. You may then control the selected mode on your smartphone
or tablet and on the device simultaneously.
Using Headphones
Do not listen to music at high volume when using headphones. Doing so can cause permanent hearing
impairment. Turn the tuner volume level to the lowest before using headphones.
> Only use headphones with a 3.5 mm jack plug.
> Insert the headphone connector in the headphone socket in front of the unit.
Long-term exposure to loud music may cause hearing damage. It is best to avoid extreme volume
when using earphones, especially for extended periods of time.
GB-18
Advertisement
Table of Contents
