Table of Contents
Advertisement
FM Operation
Press MODE button on unit or remote control to access Mode Menu. Turn the SCROLL/SELECT dial on
unit or press S / 8 buttons on remote control to select FM Radio Mode, then press SCROLL/SELECT dial
on unit or SELECT button on remote control to confirm.
The display will show the frequency.
Auto Scan
- Press the SCAN/▶" button on unit or SCAN button on remote control to
start searching for a station. Once a station has been found, the scanning
will stop automatically.
Alternatively,
- Press and hold ▶" ^/▼ □ buttons to start searching for a station.
The search may not stop at a station with a very weak signal.
Manual Tuning
To search for FM stations manually, turn the SCROLL/SELECT dial on unit or press ▶" ^/▼ □ buttons on
remote control repeatedly until your desired frequency is reached.
With FM radio, it may be necessary to fine tune each station by turning the
SCROLL/SELECT dial on unit or pressing ▶" ^/▼ □ buttons on remote control repeatedly.
Each press will adjust the frequency by 0.05 MHz. If reception is still poor, adjust the
position of the aerial or try moving the radio to another location.
FM Display Modes
Every time you press the INFO button on the unit or remote control , the display will show the following
display modes: Radio Text – Programme Type – Frequency – Date
RDS Radio Text
This is a scrolling message information about the current programme.
Programme Type
This describes the "Style" or "Genre" of music that is being broadcast.
Station Name / Frequency
When an RDS station is received, the name of that station will be displayed, or if not the frequency will be
displayed.
Date
This displays the current date provided automatically by the broadcaster.
Scan Setting
1.
Press the MENU button to access FM menu.
Press ▶" ^/▼ □ buttons to select Scan Setting and then press the SELECT button to confirm.
2.
Press S / 8 buttons to select [Yes] to receive strong signal only and then press the SELECT button
3.
to confirm.
GB-16
Advertisement
Table of Contents
