Ringer Switch; Tone/Pulse; Handset Battery Recharging - Cobra CP-9125 Operating Instructions Manual

CP9125manual(6.12) 10/20/98 11:38 AM Page 36
Operation

Ringer Switch

Ringer Switch
OFF/ON switch (on base) controls the handset
ringer.
Note
When ringer switch is off you
can detect an incoming call by
the flashing IN USE LED on the
handset or on the base.
When set on OFF, no ring will sound.

Tone/Pulse

Tone/Pulse
The CP-9125 can be used either as tone or pulse,
depending upon your phone servic e.
30
Operation

Handset Battery Recharging

Handset Battery
Recharging
When the handset battery needs recharging:
Note
Replacement batteries are
available from Cobra.
See Accessories section on
page 44.
Low Bat on handset will flash and 2 beeps will be
heard every 30 seconds for 2 minutes. Return to
base for recharging. Handset will shut off at the
end of the 2 minute perio d, terminating a conver-
sation if the handset is in TALK mode.
31