Intercom Mode From The Handset; Intercom Mode From The Base - Cobra CP-9125 Operating Instructions Manual

CP9125manual(6.12) 10/20/98 11:38 AM Page 32
Operation
Intercom Mode

Intercom Mode From The Handset

From The
Your CP-9125 can serve as an intercom between
Handset the base and the handset. To utilize this feature:
Note
Intercom may be initiated from
either the handset or the base.
Int/Page
1 Push and release button.The
will illuminate.
Intercom
In Use
2 The and LED will light on the base.
Four beeps will emit from the base.
Begin talking.
3
26
Intercom Mode The From Base
Intercom
Page/Find
In Use
1 Push and release button. The LED
Low Batt
LED will flash on the base.
Intercom
Low Batt
2 The LED will flash and the handset
Intercom
will beep.
Operation
Intercom Mode
From The Base
Note
To initiate INTERCOM while on
Hold
a call,push and release
button.Then push and release
Intercom
button.
Page/Find
Proceed following INTERCOM
instructions.
Note
Only the handset can end
INTERCOM mode. Push and
release Int/Page button to end.
27