Table of Contents
Advertisement
CP9125manual(6.12)
10/20/98 11:38 AM
Page 10
Installation
Quick Set-Up
Quick Set-Up Guide
Guide
Note
Install Ni-Cad battery in the handset.
1
The battery must be charged at
To remove the battery door, press and slide
least 12 hours before use.
downward.
Observe connection orientation, connect the
Replacement batteries are
battery and replace the door. The
available direct from Cobra.
cator will blink until the handset is placed in
See Accessories section on
the base and power is applied to the base.
page 44.
Connect power adapter in outlet.
2
4
Connect round connector into power jack on
3
In Use
base.
indicator on base will flash rapidly.
Low Batt
indi-
Charge
Place handset on base so
indicator lights.
4
In Use
indicator will stop flashing.
5
Raise antenna to vertical position.
continued
Installation
5
Advertisement
Table of Contents
