Last Number Instant Redial - Cobra CP-9125 Operating Instructions Manual

CP9125manual(6.12) 10/20/98 11:38 AM Page 26
Operation
Last Number

Last Number Instant Redial

Instant Redial
Each time you dial a number, that number is
stored in the REDIAL memor y. Up to 32 digits can
be stored. To redial the number after receiving a
busy signal:
handset or base
1 Push and release FLASH button.
2 Listen for dial tone.
Push and release REDIAL/PAUSE button.
3
4 The number will be redialed.
20
Operation
Last Number Delayed Redial Last Number
Delayed Redial
If steps 1,2 and 3 from the "Last Number Instant
Redial" still result in a busy signal,hang up. If you
would like to try again in a few minutes, push and
release TALK button for dial tone, then:
handset or base
Push and release REDIAL/PAUSE button.
3
4 The number will be redialed.
21