Out-Of-Range Signal; Power Protector™ System; Private Call™ Voice Scrambling System; Pulse/Tone Switch - Cobra Intenna CP-2505 Operating Instructions Manual

Cobra cp2505: operating instruction
Table of Contents

Advertisement

OUT-OF-RANGE SIGNAL

If three beeps are heard immediately after the TALK button is pressed, the
handset is too far away from the base. The handset and TALK indicator will
automatically turn off. Move closer to the base and then try your call again.
POWER PROTECTOR™ SYSTEM
Although the handset is battery powered, the base obtains its power from the
AC outlet. No AC, no power. This could be of critical importance should an
emergency occur during a power failure. Many homes are now exclusively
cordless, leaving them without means to quickly contact emergency services
in this situation.
Power Protector helps solve that problem. In the Intenna CP-2505, a 9 volt
battery allows the base to continue working in the event of a power failure.
The phone will be usable for up to 2 hours continuously (and up to 3 hours
with occasional use)–long enough in most cases for the power to be restored.
Replacement of the Power Protector battery with a fresh high quality
alkaline battery is recommended every six months and after a power outage
over 30 minutes. Please refer to page 6 for instructions.
PRIVATE CALL™ VOICE SCRAMBLING SYSTEM
This feature is automatically activated whenever you use your phone. Built-in
voice scrambling allows complete calling privacy by scrambling the signals
between the handset and the base and between the base and the handset,
making it unlikely that an outside source such as another cordless phone,
scanner or baby monitor to pick up a conversation from your phone. This
ensures that you will always have totally private telephone conversations.

PULSE/TONE SWITCH

Your Cobra Intenna cordless phone can be used with any
phone system because it is switchable from pulse to tone
dialing (see switch on back of the base) depending on which
service you are using. Mixed PULSE and TONE dialing may
be used (to access certain long-distance or computerized
banking services, for example) by selecting PULSE with the
base switch and then using the
temporarily switch to TONE dialing. Hanging up resets to
PULSE.

RINGER SWITCH

The OFF/ON switch (located on back of the base) controls
your cordless handset's electronic ringer; no ring will sound
in the OFF position.
®

SECUR-LOC

This exclusive Cobra electronic circuitry is an added security measure to
protect your phone line from being accidentally accessed by a neighbor's
cordless phone. Secur-Loc activates automatically when your cordless handset
is placed into its base.
2505.MANUAL.pm
button on the handset to
11
12
PULSE
TONE
OFF
ON
RINGER
11/7/97, 11:43 AM

Advertisement

Table of Contents
loading

Table of Contents