Kohler T-Bolt K-3900 Installation Manual page 17

Connect the Water Supplies and Docking Station (cont.)
Insert the bushing into the screw hole in the side of the toilet.
Install the caps over the bushings.
Using a ratchet with a 12" (305 mm) extension and a ball joint socket, evenly tighten the nuts onto
the T-bolts so the toilet is secured evenly to the floor.
Check the toilet to make sure it is level and does not rock.
Shim if necessary to level or eliminate rocking.
Kohler Co. 17 1132337-9-B