Kohler T-Bolt K-3900 Installation Manual page 12

3. Remove the Back and Side Panels
Position pieces of the box or other protective material on the floor directly in front of the toilet.
Carefully tilt the toilet forward onto the protective material.
Remove the Back Panel
Remove the four screw covers and screws on the back panel. Save the screw covers and screws.
Disconnect the wires from the panel.
Set the back panel aside in a safe place where it will not be damaged.
Remove the Side Panels
Grasp one of the side panels at the bottom and carefully lift out and up in a rocking motion. The
bottom clips will come out.
Pull the top of the panel free and disconnect the plug.
Carefully set the panel aside in a safe place where it will not be damaged.
Remove each of the four screws securing the side panel insert. Save the screws.
Remove the side panel insert and set is aside in a safe place where it will not be damaged.
Repeat with the second panel.
1132337-9-B
Disconnect
Back Panel
Screw
Screw Cover
Disconnect
Side Panel Insert
Lift from bottom of side
panel, to remove.
12
Disconnect
Screw
Side Panel
Kohler Co.