Kohler T-Bolt K-3900 Installation Manual page 13

Flanges
Clip
Wax
Ring
4. Position the Toilet
Install the T-bolts in the flange.
Install the nuts one turn. Do not thread them down all the way or the clips installed in the next step
will not fit.
Position the wax ring on the flange.
Connect the Supply Hose to the Toilet
Slide the supply hose outlet into the toilet water inlet.
Slide the clip over the flanges on the supply hose and inlet. Make sure both flanges rest in the gap
in the clip and are firmly held in place.
CAUTION: Risk of property damage. It is critical that the supply hose be firmly secured by the
clip. The supply hose could be displaced when under pressure if the clip is not correctly installed,
resulting in water damage.
Confirm the clip is firmly holding the supply hose in place. The clip will be able to rotate freely
with no significant resistance when properly installed.
Kohler Co.
T-Bolts
13
Supply
Hose
1132337-9-B