Page 2
Sealant or Saber Saw Thank You For Choosing Kohler Company We appreciate your commitment to Kohler quality. Please take a few minutes to review this manual before you start installation. If you encounter any installation or performance problems, please don’t hesitate to contact us.
Page 3
Side Front SINGLE BASIN SINK - OVERALL DIMENSIONS Model Depth (C) No. of Brackets K-3387 33” (83.8cm) 18” (45.7cm) 9-7/16” (24cm) K-3187 33” (83.8cm) 18” (45.7cm) 9-7/16” (24cm) K-3188 33” (83.8cm) 18” (45.7cm) 9-7/16” (24cm) K-3189 18” (45.7cm) 18” (45.7cm) 9-7/16”...
Page 4
- Drill a pilot hole inside the cut-out line. - Using a saber or keyhole saw, cut along the inside of the cut-out line. - Drill the required faucet holes and install the faucet to the countertop according to the faucet manufacturer’s instructions. 1021992-2- Kohler Co.
Page 5
- The type of fastener needed is dependant upon the countertop material and should be recommended by the countertop supplier. - Loosely install the mounting brackets to the countertop. - Turn the brackets parallel to the opening to allow for easy installation of the sink. Kohler Co. 1021992-2-...
Page 6
- Allow the sealant to cure for a minimum of 30 minutes. Follow the instructions provided with the sealant. - Connect the drain fitting and faucet supply fittings. - Turn on the water and check for leaks at all connections. - Tighten any connections that leak. 1021992-2- Kohler Co.
Need help?
Do you have a question about the K-3387 and is the answer not in the manual?
Questions and answers