Replacing The Light - Hotpoint HS67G2PMX/IT Manual

Table of Contents

Available languages

MOVING THE TOP HEATING ELEMENT

R emove the side accessory holder grills.

P ull the heating element out a little ( Fig. 1) and

lower it ( Fig. 2 ).

To reposition the heating element, lift it up,

pulling it slightly towards you, making sure it

comes to rest on the lateral support.

Fig. 1

! This procedure must be performed by a qualified

technician who has been authorised by the

manufacturer.

REPLACING THE LIGHT

1. Disconnect the oven from the power supply.

2. Unscrew the cover from the light, replace the bulb

and screw the cover back on the light.

Reconnect the oven to the power supply.

Note: Use 40 W/230 V type

The bulb used in the product is specifically designed for

domestic appliances and is not suitable for general room

lighting within the home (EC Regulation 244/2009).

Light bulbs are available from our After-sales Service.

- Do not handle bulbs with your bare hands as your

fingerprints could damage them. Do not use the oven until

the light cover has been refitted.

This product contains a light source of energy

efficiency class G

Fig. 2

Table of Contents