Lexmark X644E Technical Reference Manual page 69

Table 2-17: Alphanumeric ID
Command / Parameters
ESC
&n#W [operation] [string]
# = number of data bytes that make up the
operation and string
Operation
operation = 100 or 1 byte = 0x64 or
For example:
100 Media Select
String
string = See Alphanumeric String list at
right
Table 2-18: Cursor Positioning
Command / Parameters
ESC
&a#C
1
# = number of Columns
ESC
&a#H
1
# = number of Decipoints
(1 Decipoint = 1/720 inch)
ESC
*p#X
1
# = number of PCL Units
1
Parameter preceded by + or - sign denotes a relative cursor move from the current cursor position. Parameter without a
sign denotes an absolute cursor move from the top left margin.
Function / Result
Alphanumeric ID
Selects the media type using a character string. The string ID is case
sensitive and may be up to 511 bytes long.
The string ID specifies the media type requested.
' '
d ascii Media Type
Plain Paper
Bond
Transparency
Card Stock
Labels
Letterhead
Pre-printed
Colored Paper
Envelope
Custom Type 1
Custom Type 2
Custom Type 3
Custom Type 4
Custom Type 5
Custom Type 6
For example, the following shows the command and parameters used
to select bond paper:
To select letterhead paper:
Function / Result
Horizontal Cursor Position (in Columns)
Moves the cursor to a new position along the horizontal axis.
Note: The column width is determined by the space character width of
the active font or the Horizontal Motion Index (HMI), if set.
Horizontal Cursor Position (in Decipoints)
Moves the cursor to a new position along the horizontal axis.
Horizontal Cursor Position (in PCL Units)
Moves the cursor to a new position along the horizontal axis.
Note: PCL units are set by the Unit-of-Measure Command.
2-57
Alphanumeric String
Plain
Bond
Transparency
Card Stock
Labels
Letterhead
Preprinted
Color
Envelope
Custom Type 1 or User Type 1
Custom Type 2 or User Type 2
Custom Type 3 or User Type 3
Custom Type 4 or User Type 4
Custom Type 5 or User Type 5
Custom Type 6 or User Type 6
ESC
&n5WdBond
ESC
&n11WdLetterhead
PCL