Common Variables For Pcl Emulation - Lexmark X644E Technical Reference Manual

Table 3-4: Printer Unique Variables for Both Printer Languages (Continued)
Variable
LTYPE1FONTS
LUSDEFAULTS
(DEFAULT only)

Common Variables for PCL Emulation

Note:
Use these variables only for PCL emulation. The
parameter should be specified as
@PJL SET LPARM:PCL FONTSOURCE=I<CR><LF>
To determine which variables your printer supports, see "Table B-3: Common
Variables for PCL Emulation" on page B-11.
Table 3-5: Common Variables for PCL Emulation
Variable
FONTNUMBER
FONTSOURCE
PITCH
PTSIZE
SYMSET
Function Selections
Enables Type 1 OFF, ON
fonts for PCL
emulation
US/non-US US, NONUS
defaults
The word common applies to those variables common to both your printer
and the Hewlett-Packard Company's LaserJet printers.
Function Selections
Font Number 0, 1, .... n
Font Source I, S, M1, M2, M3, M4, D1
I
S
M1, M2,
M3, M4
D1
All other values default to internal font source.
Default pitch 0.08 to 100 (in increments of 0.01)
(fixed-pitch fonts)
Note: If an invalid pitch is requested, the printer
selects the closest pitch.
Default point size 1 to 1008 (in increments of 0.25)
(proportional
Note: If an invalid point size is requested, the
spaced fonts)
printer selects the closest point size.
Symbol set for the If a symbol set is requested that is not resident
default font in the printer, the symbol set is not changed.
3-48
[command modifier:value]
: . For example:
LPARM PCL
Internal font source
Permanent download fonts
Flash font source
Disk font source
PJL
Factory Default
ON
US, NONUS
(Country specific)
Factory Default
0
I
10.00
12.00
PC8, PC850
(Country specific)