Lexmark X644E Technical Reference Manual page 252

Table 4-8: Page Device Parameters (Continued)
Key
PowerSave
ProcessColorModel
Punch
SlipSheet
Type Definition
integer A value of 1–120 or 1–240 (model specific) indicates the number of minutes that
elapses after the last page prints and before the Power Saver feature is invoked.
A value of 0 (zero) indicates the Power Saver feature is turned Off on some
printer models.
Note: Some printer models released in the year 2000 or later designated as
Energy Star printers cannot have Power Saver disabled.
This value is initialized at the start of each PostScript emulation job to the value of
the
Power Saver
Note: This parameter can only be modified within a system administration job.
name or Specifies the color model to use for rendering process colors in the printer.
string Supported values are:
DeviceGray
DeviceRGB
DeviceCMYK
DeviceCMY
integer Requests holes to be punched in the output page. The format for setting the
Punch key is:
<</Punch n>> setpagedevice
where n is one of the following values:
0 Do not punch holes in the output page.
3 Punch holes in the output page.
integer Specifies where blank separator sheets should be inserted in the output.
Supported values are:
0 Do not insert separator sheets.
1 Insert a separator sheet at device deactivation.
2 Insert a separator sheet at the end of the print job.
3 Insert a separator sheet at the end of each set in a multicopy job.
If Collate is set to True, a set consists of one copy of each page of the
document. For example, if a print job is five pages long, a set is one
copy of pages one to five. If Collate is set to False, a set is all the
copies of a single page of the job. For example, if a print job is three
copies of a five page job, a set is three copies of the first page.
4 Insert a separator sheet after each showpage or copypage.
4-59
menu item.
PostScript