Vivitar DVR 4K v3 Easy Manual page 7

Open the touch screen, the camcorder will be powered on automatically.
Power button
You can also power on the camcorder by pressing the Power/OK/IR Night button.
Power/OK/IR Night
button for 3 seconds.
Notes:
It takes 5 seconds to power on/o the camcorder by openning the touch screen. If you
open/close the touch screen twice in this reaction time, it may cause the camcorder can not
before operating the machine again.
Set the camcorder
You can make custom settings of the camcorder.
After power on the camcorder, tap the Menu icon of the screen or press the Menu button to
open the menu.
Menu Section
Submenu
for current mode
System settings
Exit the menu
Tap the screen OR Press the MENU button