Advertisement
Troubleshooting:
If you encounter problems with the camcorder, please refer to this section.
1. The camcorder cannot be turned on after installing the battery
battery.
(2) The battery is installed in reverse, please confirm that the battery is installed in the correct
way.
(3) The battery insulating paper is not removed.
2. The battery is not charging
(1) If the red light of the charging indicator flashes, the battery is not in place or the contact is
poor. Please re-install the battery until the indicator light is on (the indicator light goes out
when the battery is fully charged
whether the charger is connected normally.
(3) The ambient temperature is lower than 10℃, which may lead to slow charging or failure to
charge.
3. The remote control does not work
(1) When using the remote control, pull out the bottom insulating paper. When the insulating
paper is pulled out, if it still does not work, pull out the battery of the remote control and
reinsert it.
(2) The remote control cannot remotely control the camcorder to turn on, but can only
remotely turn it o .
4. Camera crashes
(1) Quickly pressing any button of the camcorder may cause the camcorder freezes.
After it crashes, unplug the battery and reboot. Tip: When the camcorder is recording or
taking pictures, do not quickly press the camera button. Under normal circumstances, the
camcorder will display a waiting icon.
5. The memory card cannot be recognized:
(1) Please check whether the memory card complies with SD card (class10), the maximum is
not more than 256G.
(2) Please check whether the memory card is inserted backwards.
(3) When the memory card is used on the camcorder for the first time, it is recommended to
format it first.
Advertisement
