Verizon CR1000B User Manual page 162

2. Slide the bar to adjust the brightness of the LED.
3. Select your preferred timeout period (in minutes) from the
dropdown list for the LED dimming setting. The Status LED
will automatically turn off after the timeout period.
4. Click Apply changes Apply changes to save changes.
Note: The light will activate again on status changes like WPS
pairing or loss of connection.
5.3e/ OPEN SOURCE SOFTWaRE
To view: From the Advanced
and then click Open Source Software Open Source Software.
Advanced menu, select System
05 / CONFIGURING
ADVANCED SETTINGS
System from the left pane
©2022 Verizon. All Rights Reserved
162