Connecting To A Wireless Network Using Macintosh; Installing The Printer On A Wireless Network (Macintosh) - Lexmark X466DTE Install Manual

Connecting to a wireless network using
Macintosh
Installing the printer on a wireless network
(Macintosh)
Before you install the printer on a wireless network, make sure that:
•
A wireless card is installed in your printer.
•
Your wireless network is set up and working properly.
•
The computer you are using is connected to the same wireless network where you want to set up the printer.
Prepare to configure the printer
1
Locate the printer MAC address on the sheet that came with the printer. Write the last six digits of the MAC address
in the space provided below:
MAC address: ___ ___ ___ ___ ___ ___
2
Connect the power cable to the printer and then to a properly grounded electrical outlet, and then turn the printer
on.
3
From the printer control panel, select your language and country or region, and then touch Continue.
4
Select your time zone, and then touch Continue.

Connecting to a wireless network using Macintosh

10