Tw In Recording - Kenwood XD Series Instruction Manual

58

Tw in recording

This function allow s to record CD sound simultaneously
on a tape and M D. All tracks on a CD can be recorded in the
same order as they are recorded on the CD.
When recording sound from the M D recorder to a cassette
deck, be sure to read the instruction manual of the optional
M D recorder (DM -F70).
Recording preparations are required. ¤
1
Press so that the "PGM " indicator goes off.
2
Select the disc.
3
Start edit recording.
To end recording in the middle
1. When the TWIN REC key is pressed during playback of CD, the playback stops and the CCRS setting (preparing edited recording) starts.
2. The automatic recording level setting in the edit recording is based on a suitable section for recording level setting in the loaded CD.
Notes Notes
3. If the deck is set for one-side recording ( " ), the processing at the tape end is applied only on side A.
Downloaded from: http://www.usersmanualguide.com/
(For the systems including DP-M H5)
P.MODE
DISC SKIP
Go to step 3 before playback starts.
TWIN REC
7
÷ Both the cassette deck and CD player stop.
¤ ¤ ¤
¤
For the reverse mode, select """ ,"["(tw o-w ay recording).
÷ The recording input of the M D recorder is set automatically to "DIGITAL" .
PGM M EM O
AUTO DISC
TUNED STEREO
During recording: X-H5
÷ The recording level and bias w ill be adjusted automatically in approx. 60
seconds (variable depending on CD contents), after w hich recording
starts.
÷ The CD tracks are recorded in the order they are recorded on the CD.
÷ The tape and CD stop automatically w hen recording has completed.
For the systems including the DP-M H5
Should be OFF.
PGM M EM O EDIT RDS EON
C D *
AUTO DISC ALL
TUNED STEREO
M AX
SLEEP
Selected disc No.
EDIT RDS EON TA NEWS INFO. TP PTY TOTAL SPACE
D 1 * ) 1 * * ) ) : 2
ALL
M AX
SLEEP O.T.T. ECHO P.B.C.
Blinks Lights
CCRS REC / ARM
Convenient CD recording
XD SERIES (En/ E2 )
TA NEW
O.T.T.
PROG. M UTE N.B.
12
5
4
kHz 2 3
1
M Hz
9 10
7 8
6
11 12 13 14 15
EQ.
MANU.
16 17
18 19
20
ON