Removing And Reinstalling The Software - Lexmark X3550 User Manual

Note: Resetting to factory default settings will delete all printer settings you selected.
1
Press to turn off the printer.
2
Press and hold the Settings and Start Color buttons at the same time, then press again
back on.
Language appears on the display, indicating that the printer has been reset.
3
Press or until the language you want appears.
4
Press .
5
Press or until the country or region you want appears.
6
Press .

Removing and reinstalling the software

If the printer is not functioning properly, or if a communications error message appears when you try to use the
printer, you may need to remove and reinstall the printer software.
1
Click Start Programs or All Programs
2
Select Uninstall.
3
Follow the instructions on the computer screen to remove the printer software.
4
Restart the computer before reinstalling the printer software.
5
Click Cancel on all New Hardware Found screens.
6
Insert the CD, and then follow the instructions on the computer screen to reinstall the software.
Note: If the install screen does not appear automatically after you restart your computer, click Start
then type D:\setup, where D is the letter of your CD-ROM drive.
If the software still does not install correctly, visit our Web site at www.lexmark.com to check for the latest software.
1
In all countries or regions except the United States, select your country or region.
2
Click the links for drivers or downloads.
3
Select your printer family.
4
Select your printer model.
5
Select your operating system.
6
Select the file you want to download, and then follow the directions on the computer screen.
Lexmark 3500-4500 Series.
100
to turn the printer
Run, and