Samsung AJ040TXJ2KG/EU Technical Data Book page 307

Free joint multi for europe r32, 50hz, hp
Table of Contents

Advertisement

13. Installation
Optional: Fixing the outdoor unit to a wall with a rack
Designed to cut off residual vibration from
outdoor unit to rack. (not supplied with product)
Anchor bolt
Base surface
Soft rubber designed to cut off vibration from
rack to wall. (not supplied with product)
• Install a proper grommet in order to reduce noise
and residual vibration transferred by the outdoor
unit towards the wall.
CAUTION
• When installing an air guide duct, be sure to check
the following:
- The screws do not damage the copper pipe.
- The air guide duct is fixed firmly on the guard fan.
※ In case you want more information about the controllers and accessories, please refer to the Controller and Accessory TDB
on pvi.Samsung.com site or Global Partner Portal site.
Connecting the power cables, communication
cable, and controllers
You must connect the following three electrical cables to the
outdoor unit:
• The main power cable between the auxiliary circuit
breaker and the outdoor unit.
• The outdoor-to-indoor power cable between the
outdoor unit and the indoor unit.
• The communication cable between the outdoor unit and
the indoor unit.
CAUTION
• During installation, make first the refrigerant
connections and then the electrical connections. If
the unit is uninstalled, first disconnect the electrical
cables and then the refrigerant connections.
• Connect the air conditioner to the earthing system
before making the electrical connections.
NOTE
• Especially, if your outdoor unit is the one designed
for Russian and European markets, consult the
supply authority, if necessary, to estimate and
reduce the supply system impedance before
installation.
CAUTION
• For the product that uses the R-32 refrigerant, be
cautious not to generate a spark by keeping the
following requirements:
- Do not remove the fuses with power on.
- Do not disconnect the power plug from the wall
outlet with power on.
- It is recommended to locate the outlet in a high
position. Place the cords so that they are not
tangled.
307

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents