Removing The Driven Pulley; Inspecting The Clutch Drum - PIAGGIO MP3 400 hpe E5 2021 Service Manual

Engine
- Insert the Seeger ring.
- Insert the alignment dowels if removed during
disassembly.

Removing the driven pulley

To remove the driven pulley, proceed as follows:
- Remove the drive pulley to release the drive belt.
- Remove the driven pulley together with the belt.
WARNING
AS A RESULT OF THE OPERATION THERE MAY BE A
LIGHT "HAMMERING" BETWEEN THE KNURLING OF THE
PULLEY AXLE. THIS CAN MAKE REMOVAL BY HAND DIF-
FICULT.
IN CASE OF NEED USE AN EXTRACTOR.

Inspecting the clutch drum

- To remove the housing from the driven pulley
shaft it is necessary to remove the complete clutch
assembly from the engine as described in section
«Disassembling the clutch».
- Remove the protection caulking.
ENG - 40
MP3 400 hpe E5