Lexmark Prospect Pro205 User Manual page 130

4
Press the arrow buttons to scroll to Scan, and then press
5
Press the arrow buttons to scroll to Before Dial, and then press
E
NABLE ERROR CORRECTION
Errors and blurs may appear in the faxed document if there is too much noise on the line. This option enables the
printer to transmit the bad blocks of data again and correct the errors. When a fax has too many errors, the fax may
be rejected by the receiving fax machine.
To make sure that error correction is enabled:
1
From the printer control panel, press
2
Press the arrow buttons to scroll to Fax Setup, and then press
3
Press the arrow buttons to scroll to Dialing and Sending, and then press
4
Press the arrow buttons to scroll to Error Correction, and then press
5
Check to see if error correction is set to On.
If it is not set to On, press the arrow buttons to select On, and then press
E
NABLE AUTOMATIC FAX CONVERSION
If the receiving fax machine does not support color fax, then this option automatically converts the outgoing color
fax to black and white. It also automatically reduces the resolution of the fax to a resolution that the receiving
machine can support.
To make sure that automatic fax conversion is enabled:
1
From the printer control panel, press
2
Press the arrow buttons to scroll to Fax Setup, and then press
3
Press the arrow buttons to scroll to Dialing and Sending, and then press
4
Press the arrow buttons to scroll to Auto Fax Convert, and then press
5
Check to see if automatic fax conversion is set to On.
If it is not set to On, press the arrow buttons to select On, and then press
M
AKE SURE THAT THE
The dialing prefix is the number or series of numbers that you press before you can dial the actual fax number or
telephone number. If the printer is in an office setting or in a private branch exchange, this can be a specific number
that you need to press so you can make a call outside the office.
Make sure that the dial prefix entered in the printer is correct for your network.
To check the dial prefix setting:
1
From the printer control panel, press
2
Press the arrow buttons to scroll to Fax Setup, and then press
3
Press the arrow buttons to scroll to Dialing and Sending, and then press
.
.
D P
IAL REFIX SETTING IS CORRECT
.
Troubleshooting
.
.
.
.
.
130
.
.
.
.
.
.
.