Table of Contents
Advertisement
Wall or Other Mounting with VESA Standard
CAUTION The wall mount must bear a minimum of ve times the
monitor's net weight. To mount your MONITOR to the wall or
another surface,you need to purchase a VESA wall mount.Use four
(M4-L8 mm screws (the base attachment screws removed in step 1
below are(M4-L8 mm)to attach the mount.The monitor mount VESA
hole pattern is (0E-24EVGHDMI (100mmx100mm) 0E-27EVGHDMI
(100mmx100mm))
Note: Metric M4-L8 mm is the type scerw that should be used (do not use longer
screws or the monitor may be damaged).
1. Before mounting the monitor, remove the base riser (vertical portion of the base) by
removing the four screws near the top with a screwdriver. Then the base and the
riser can be removed. In order to prevent losing these screws, we suggest replacing
the screws in their original holes.
2. Attach the VESA mounnt (0E-24EVGHDMI(100mm x 100mm)(0E-27EVGHDMI
(100mm x 100mm)) plate to rear of the monitor andfollow all of the instructions provided
with the mount to complete the mounting process.
Mountin g Guide
12
Advertisement
Table of Contents
Need help?
Do you have a question about the 0E-24EVGHDMI and is the answer not in the manual?
Questions and answers