Controls & Menu Operation - WBOX Technologies 0E-24EVGHDMI User Manual

Control Keys / Buttons
Buttons are located on the right side of the
BACKCASE on ALL models, looking at the
backside of the monitor.
Source Auto detection function when there
is/are source(s) connect to the monitor, monitor
will auto detect the source(s) and auto select
the desired source. The source should be
selected manually when there is more than
one source to the monitor.
A. " E " (SOURCE) button
To change the input selection, press
" E " to display the pop-up menu,
use up/down to highlight the desired
then press left/right to complete
" E "
the selection.
To verify the current input selection,
press " E " to display the pop-up,
then press"M(MENU) "again to
dismiss the pop-up.
●Press the button to display
all the signal channel menus.
When Main MENU display as
confirmation key during the
OSD operation
B. " M " (MENU) button
●Press the button to show the On-Screen Display main menu.
●Press the button to exit OSD menu.
C. " " (RIGHT) button
●Press the button, volume increase.
D. " " (LEFT) button
●Press the button, volume decrease.
Press the button to scroll the cursor to desired function.
E. " " (POWER) button
●Press the button to turn ON or turn OFF the monitor.
Controls & Menu Operation
M
Auto Select
6
E
VGA
HDMI