Lexmark ImageQuick User Manual page 32

Example 1
Example 2
Note:
Only paper trays that
have the PostScript page device
parameter MediaType set to
"Plain Paper," "Custom Type," or
null are eligible for AutoFit. If no
trays meet this criteria, the
default tray is used. Other paper
types are used by disabling
AutoFit and setting the default
paper tray.
32
Operator panel function
The image is 10 inches wide by 9 inches high with 8x11 and 11x17
paper installed:
delta 8x11 (portrait) = abs (11 – 9) + abs (8 – 10) = 4
delta 8x11 (landscape) = abs (11 – 10) + abs (8 – 9) = 2
delta 11x17 (portrait) = abs (17 – 9) + abs (11 – 10) =
7
delta 11x17 (landscape) = abs (17 – 10) + abs (11 – 9)
= 9
Select 8x11 landscape.
The image is 18 inches wide by 12 inches high with 8x11 paper
installed. The orientation is reverse portrait:
delta 8x11 (portrait) = abs (11 – 12) + abs (8 – 18) =
11
delta 8x11 (landscape) = abs (11 – 18) + abs (8 – 12) =
11
Since the image is larger than the page in either orientation, the
aspect ratio is calculated.
The aspect ratio is 18/12 > 1, so landscape or reverse landscape is
chosen. Applying the rule for changing orientation yields reverse
landscape.