Download
Share
Print this page
Furuno LH-5000 Operator's Manual
  1. Manuals
  2. Brands
  3. Furuno Manuals
  4. Marine Equipment
  5. LH-5000
  6. Operator's manual

Furuno LH-5000 Operator's Manual

Loud hailer
Hide thumbs Also See for LH-5000:

Advertisement

Quick Links

Download this manual
OPERATOR'S MANUAL
LOUD HAILER
LH-5000
Model
www.furuno.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the LH-5000 and is the answer not in the manual?

Questions and answers

Related Manuals for Furuno LH-5000

Summary of Contents for Furuno LH-5000

  • Page 1 OPERATOR'S MANUAL LOUD HAILER LH-5000 Model www.furuno.com...

  • Page 3: Safety Instructions

    If the equipment is hot to the touch or is Loud Hailer emitting strange noises, turn off the power 0.45 m 0.30 m LH-5000 immediately and contact your dealer for Intercom Speaker advice. 2.25 m 1.50 m ISP-5000 Do not operate the equipment with wet hands.
  • Page 5 LH-5000 Operator’s Manual Contents 2.10 Hailing by Voice ................ 27 2.11 Sounding Warning Signals ............28 2.12 Transmitting the Auxiliary Signal..........32 2.13 Setting the Alarm Mode ............33 2.14 Setting the Siren Mode ............. 35 2.15 Setting the Key Beep ..............36 2.16 Renaming the Intercom Station ..........
  • Page 8 Loud Hailer LH-5000 Main body Microphone MIC-5000 Hanger Accessories Hanger Knob Microphone Hanger Cushion Template See packing list for details Tapping Screw Installation Materials (ST4.0 x 16) Tapping Screw (PA4.0 x 25) Operator’s Manual Document Packing List Spare parts Fuse (250VAC 15A)
  • Page 9 Intercom Speaker ISP-5000 Max.6 (with Hanger) packing Option list for Extension Cable EX-CBL-LH details for microphone...
  • Page 10 Put the hanger in a location where it is easy to install the LH-5000 Loud Hailer. Fix the hanger with four screws. Set the loud hailer to the hanger. Tighten the knob bolts on both sides of the hanger. Connect the intercom speaker to the loud hailer using the color-coded signal cable.
  • Page 11 Hanger Loud hailer Tapping screw(PA4.0 x 25) Hanger knob Determine the position of installation holes according to the marking template and drill the hole. Pry off the frame from the front panel. Paste the cushion on the back of the front panel with the double-side tape on the cushion.
  • Page 12 Make sure that every signal cable is firmly connected. Place the LH-5000 Loud Hailer in the hole and fix it with four screws. Attach the microphone to the front microphone connector on the loud hailer. Connect the power cord properly.
  • Page 13 Determine a location where it is easy to install hanger. Fix the hanger with three screws. Place the microphone into the hanger. Microphone hanger 3 Microphone Tapping screw (ST4.0 x 16)
  • Page 14 Put the hanger in a location where it is easy to install the intercom speaker. Fix the hanger with four screws. Set the intercom speaker to the hanger. Tighten the knob bolts on both sides of the hanger. Connect the signal cable. Hanger Intercom speaker Tapping screw (PA4.0 x 25)
  • Page 15 Determine the position of installation holes according to the marking template and drill the hole. Pry off the frame from the front panel. Paste the cushion on the back of the front panel by the double-side tape on the cushion. Place the intercom speaker in the hole and fix it with four screws.

  • Page 16: Intercom Speaker

    Template 4 Frame Cushion 5 Intercom speaker Tapping screw (PA4.0 x 25) Drill a round or square hole on the ship panel. The diameter of the hole ranges from 20 mm to 25 mm.
  • Page 17 Thread the extension cable through the hole. Place the seal, cable holder, and waterproof cover sequentially around the extension cable. Fasten the nut. Fasten the three screws. Put the cover on the extension cable and tighten it. Cable holder Waterproof cover Seal Tapping screw (PA3.0 x 10) Extension cable...
  • Page 18 The following diagram illustrates how to connect the cable. Before you connect the cable, it is recommended to know the corresponding relationship about cables. For pig-tail cable-1...
  • Page 19 PURPLE FWD+ Forward horn (+) output GRAY FWD- Forward horn (-) output BROWN Chassis GND Forward horn chassis GND PURPLE AFT+ AFT horn (+) output GRAY AFT- AFT horn (-) output BROWN Chassis GND AFT horn chassis GND For pig-tail cable-2 PURPLE EXT SPK+ External speaker (+) output...
  • Page 20 PURPLE SPK+ Intercom speaker (+) output GRAY SPK- Intercom speaker (-) output BROWN Chassis GND Intercom speaker chassis GND GREEN CALL Call signal input WHITE Call signal GND For power cord-1 to 2 DC_IN (+) DC power (+) input, 12 V DC BLACK DC_IN (-) DC power (-) output...
  • Page 21 Referring to the figure below, place heat shrink tubes on the wires, and then solder the correction point. Move the heat shrink tubes to the soldered correction, and then apply heat to the tubes. Secure the cable with insulation tape.
  • Page 22 Remove the protective cover of the rear microphone connector. Connect one end of the extension cable to the connector on the unit and tighten it.
  • Page 23 Secure the other end of the extension cable to the panel. Connect the microphone to the connector of extension cable. Loosen the screw on the rear back of the unit.
  • Page 24 Place the grounding wire on the screw. Tighten the screw again.
  • Page 25 Front Microphone Connector Down Key Speaker Up Key ALL Key Both Key Intercom Selector Keys (IC1-IC6) Listen Volume Control/Power On-Off Forward Key AFT Key Menu Key Hailer Volume Control Enter Key Fog Key...
  • Page 26 IC Speaker Signal Cable External Speaker/Alarm/AUX (IC1–IC6) Signal Cable Hailer Speaker Cable Rear Microphone Connector To turn on the LH-5000, rotate the Listen Volume Control/Power On-Off knob clockwise. To turn off the LH-5000, rotate the Listen Volume Control/Power On-Off knob counterclockwise.
  • Page 27 Press Up or Down key to increase or decrease the brightness of the keys on the front panel. Press ENT key to confirm your settings. If you do not adjust the brightness within 60 seconds, the LH-5000 returns to the previous mode automatically. Press the MENU key on the front panel.
  • Page 28 Volume Control knob. To adjust the volume from the intercom or horn speaker, rotate the Hailer Volume Control key. All speakers include all the six intercom speakers and both horn speakers. Press the ALL key on the front panel. The following information appears on the screen. Press and hold the PTT key on the microphone and speak into the microphone.
  • Page 29 All the keys from IC1 to IC6 light red and the following information appears on the screen. Press and hold the PTT key on the microphone and speak into the microphone. The following information appears on the screen. Release the PTT key to receive. After finishing your conversation, press the ALL key to return to the home screen.
  • Page 30 The intercom speaker name appears in the bottom line of LCD. To rename the name, see 2.16 Renaming the Intercom Station. Press and hold the PTT key on the microphone and speak into the microphone. The following information appears on the screen. Release the PTT key to receive.
  • Page 31 For example, the LH-5000 receives calls from IC1 and IC 5 at the same time, it will handle the call from IC1 first and then the call from IC 5.
  • Page 32 After completing your conversation, press the ALL key to return to the home screen, or press the same selected key (IC1-IC6) to back to previous mode. Press the selected key (IC1–IC6) and hold the PTT key on the microphone to answer the call. Only in ALL mode, you can perform this function.
  • Page 33 The speaker(s) works as microphone(s). After speaking, press the ALL key to return to the home screen. The LH-5000 has eight warning signals including manual, yelp, underway, stopped, sailboat, towed, anchored, and aground. The manual and yelp signals are sounded when you press and hold the PTT key on the microphone.
  • Page 34 One 5-second blast at 120-second interval. power-driven Underway vessels underway. Two 3-second blasts, with a 2-second power-driven interval between each blast, repeated every vessel that is 120 seconds. stationary. Stopped For sailboats, One 3-second blast, followed by one tug boats and 2-second interval, one 1-second blast, one Sailboat tow boats...

  • Page 35: Operation Overview

    LH-5000 Operator’s Manual Operation Overview Warning Function Remarks Signal 2s 1s 2s1s 120s Sailboat Signal One 3-second blast, followed by one For vessels 2-second interval, one 1-second blast, one under tow. 2-second interval, one 1-second blast, one 2-second interval, and one 1-second blast.
  • Page 36 For vessels Two bell tones of 0.5 seconds, a bell tone of aground. 1.5 second followed by a rapidly ringing bell tone for a duration of about 5 seconds, followed by two bell tone of 0.5 seconds and a bell tone of 1.5 seconds. Repeated Aground once every 60seconds.
  • Page 37 The LH-5000 stops sounding the warning signal until the PTT key is released. Press the FOG key on the front panel. Press the Down key to select "UNDERWAY". The following information appears on the screen. Press the ENT key on the front panel to activate the automatic warning signal.
  • Page 38 In AUX mode, all the intercom speakers output the signal from the external source such as audio player, etc. The LH-5000 works as a burglar alarm by connecting an external switch to the ALARM terminals on the rear panel. When the alarm mode is enabled, both horn speakers are automatically selected.
  • Page 39 The BOTH key glows red every four second, and the following information appears on the screen. Countdown will start. After five minutes, the LH-5000 goes to "STAND BY" mode. Then it sounds alarm tone loudly for two minutes, and then pauses for five minutes.
  • Page 40 The LH-5000 in the siren mode sounds the warning signal such as YELP through both horn speakers, alerting nearby vessels of your presence and status. To interrupt the warning signal, press and hold the PTT key on the microphone and speak into it.
  • Page 41 A short tone sounds from the selected intercom speaker and the corresponding information appears on the screen. Press the PTT key on the microphone and speak into it. Release the PTT key to receive. After finishing your conversation, press the same selected key from IC 1 to IC 6 to return to the siren mode.
  • Page 42 OFF: You do not hear the beep when pressing the key on the front panel. Press the MENU key on the front panel. Press the Up or Down key to select "RENAME IC" and press the ENT key. Press the Up or Down key to select the intercom station to be modified and press the ENT key.
  • Page 43 Press the Up or Down key to select "SPEAKER" and press the ENT key. Press the Up or Down key to select "INTERNAL" or "EXTERNAL" and press the ENT key. INTERNAL: uses the built-in speaker. EXTERNAL: uses the external speaker. Press the MENU key on the front panel.
  • Page 44 Press the ENT key. All your customized settings such as key backlighting are restored to factory settings. The table below lists the factory setting. DIMMER Level 3 CONTRAST Level 3 SOURCE ALARM SIREN KEY BEEP IC1 Name: IC1 IC2 Name: IC2 RENAME IC IC3 Name: IC3 IC4 Name: IC4...
  • Page 45 IC6 Name: IC6 INTERNAL SPEAKER...
  • Page 46 Make sure the product is completely dry before use. If the LH-5000 cannot be powered on, the 15 A fuse inside the power cord may be blown. In this case, only the qualified technician is allowed to check and...
  • Page 47 When the LH-5000 does not work properly, you can follow troubleshooting procedures to fix it. If the following solution cannot solve your problems, please contact your qualified technician for more technical support. Check whether the power cord is connected tightly.

  • Page 48: Standby & Backlight

    Dimensions (H×W×D) 1100×2200×108 mm Weight (with cable and 1.59 kg knob/hanger) Power Supply 10.8–15.6 V DC Full Load (2 hailer& 6 ≤11A (12V DC) intercoms) Standard (1 hailer& 1 ≤5 A(12V DC) Power Consumption intercom) Standby & Backlight ≤280 mA (12V DC) Level 3 Hailer Speaker 30 W,...
  • Page 49 ± Auxiliary 0.5 kΩ Microphone ± 3 mVrms (1 kHz) Sensitivity 775± Auxiliary 50 mVrms (1 kHz) Hailer ≤10% (1 kHz/30 W) Distortion Intercom ≤10% (1 kHz/5 W) Hailer 60 dB (1 kHz & A-weight) Intercom 60 dB (1 kHz &...
  • Page 50 All specifications are tested according to applicable standards, and subject to changes without notice due to continuous development.
  • Page 59 LH-5000 Operator’s Manual Interconnection Interconnection...
  • Page 60 DIMMER CONTRAST SOURCE ALARM SIREN KEY BEEP MENU IC1 IC6 RENAME IC RESET ALL INTERNAL SPEAKER EXTERNAL SW VER. SELF TEST EEPROM IF OK, RESET ALL PRESS ENT SERVICE PASSWORD...
  • Page 61 LH-5000 Operator’s Manual Flush Mount Template...
  • Page 62 LH-5000 Operator’s Manual Flush Mount Template...
  • Page 64 ・FURUNO Authorized Distributor/Dealer 9-52 Ashihara-cho, Nishinomiya, 662-8580, JAPAN A : OCT 2017 Printed in Japan All rights reserved. C : JUL . 07, 2022 Pub. No. OME-57070-C (TASU ) LH-5000 0 0 0 1 9 9 8 5 0 1 0...