Dts Effects And Parameters; Dts 2-Channel; Dts Music - Lexicon DC-1 Owner's Manual

DC-1 Version 4 Digital Controller
DTS effects are compatible with DTS Digital Surround input signals. These
effects, along with the PCM Effects described in Chapter 3, and the AC-3
Effects described in Chapter 4, are included in the DTS version of the
DC-1. Any DTS-capable software and/or source components should be
labeled with a DTS badge, similar to the one on the DC-1 front panel.
This effect mixes DTS Digital 5.1 information for two-channel playback.
These soundtracks can be recorded onto two-channel formats, or played
back through left and right front speakers. The mix is designed to play back
with full surround when decoded through Logic 7. In mixing a film with
very heavy use of the Low Frequency Effects Channel, it may be desirable
to lower LFE MIX LEVEL.
Parameter
CENTER MIX
SURROUND MIX
CENTER DLY SAMPLES
MASTER LEVEL
LFE MIX LEVEL
SUBWOOFER LVL
CUSTOM
This effect enhances playback of DTS music recordings, or DTS film
soundtracks with strong musical content. This effect contains many of the
features found in DTS LOGIC 7, with settings that are more appropriate for
music.
Parameter
RE-EQUALIZER
BASS ENHANCE
REAR DLY OFFSET
SIDE LEVEL
REAR LEVEL
LFE MIX LEVEL
SUBWOOFER LVL
CUSTOM
Initial Value
16
+2dB
0
+5dB
+0.0dB -20.0dB to +0.0dB
+00dB OFF, -30dB to +05dB
Initial Value
OFF
OFF
+5ms
+00dB OFF, -30dB to +05dB
+00dB OFF, -30dB to +05dB
-10.0dB -20.0dB to +0.0dB
+00dB OFF, -30dB to +05dB
DTS Effects and

DTS Effects and Parameters

Range
0-30
-5 to +5dB
-127 to +127
-5dB to +5dB
Range
ON, OFF
ON, OFF
0-20ms
5
Parameters

DTS 2-Channel

DTS Music

51