Speco D4VN User Manual page 25

Resolution Select 1920x2160, 1280x1944, 2580x1440, 1280x1440, 2048x1535, 1920x1080,
1920x540, 1280x720 and 640x360 using a mouse or a remote control.
*Selectable recording resolutions are differ from input camera resolution.
Set the frame rate for the specified channel. The sum of the frame rate values per
Frame Rate
channel cannot exceed the maximum frame rates for a specific recording resolution.
Select the recording quality for the selected channel. Options are;
Quality
Level 1 (Low), Level 2, Level 3, Level 4, and Level 5 (High)
Assign the recording mode for the selected channel. Options are: Continuous,
Recording
Motion, Sensor, Schedule, Disable and Smart Recording (c + m : continuous &
Mode
motion, c + s : continuous & sensor)
When Motion Recording is selected, Continuous + Motion recording option can be
used.
Sensor Select the sensor setting for the selected channel.
Recording
Pre Record Enable/disable pre-event recording. Pre-event recording time is up to 20 minutes.
Post Record Set the post event recording time duration for the specified channel.
(10~60 seconds)
Audio Enable/disable audio recording for the specified channel. It supports only on Ch1~4.
Set the recording schedule. (Refer to Page 27 Recording Schedule)
Schedule
Codec Type Select the recording codec (H.264 or H.265)
H.265 is over 30% better than H.264 while recording.
25