Related Manuals for AMCOL 6000E
Summary of Contents for AMCOL 6000E
- Page 1 AMCOL CORPORATION ELECTRONIC TIMING CONTROLLER FOR FORMING AND FABRICATING 6000E SYSTEMS TECHNICAL DESCRIPTION AND OPERATOR’S MANUAL...
- Page 2 In many situations, the electronic control of pulse rate comes from the machine PLC. Programming a PLC and installing additional hard wiring for the two-solenoid configuration is not always easy. AMCOL has created a quick simple solution to convert your one electric air solenoid output to a two-valve output.
- Page 3 Additional screens allow for modification of these settings. To incorporate this technology, an AMCOL 6000E Precision Applicator is required. The two- solenoid control package is available on new AMCOL 6000 Series Spray equipment and can also be retrofitted to older model single air source systems.
- Page 4 (∨) (see Figure 6). Input and output settings are increased and decreased by 1, and timing settings are increased or Figure 6 decreased by 100ms per press. P A G E | 4 ELECTRONIC TIMING CONTROLLER FOR FORMING AND FABRICATING 6000E SYSTEMS TD-OM...
- Page 5 T60A Injectors and pneumatic controls and connections. Please remember this controller is only applicable for use with an AMCOL 6000 Series Precision Spray Applicator with the two-solenoid control package. P A G E | 5...
- Page 6 Wiring Diagrams 6000-ETC-24 6000-ETC-110 6000-ETC-24-LLI 6000-ETC-110-LLI AMCOL Corporation 21435 Dequindre, Hazel Park, MI 48030 248-414-5700 fax: 248-414-7489 www.amcolcorp.com P A G E | 6 ELECTRONIC TIMING CONTROLLER FOR FORMING AND FABRICATING 6000E SYSTEMS TD-OM...
Need help?
Do you have a question about the 6000E and is the answer not in the manual?
Questions and answers