Check Point Quantum LightSpeed Appliance QLS250 Installing And Removing page 6

QLS250, QLS450, QLS650, and
QLS800
Important
n Read the Health and Safety Information
Quantum LightSpeed Appliances Getting Started Guide
You can hot swap one cooling fan unit at a time. A cooling fan unit consists of two fans in QLS250
n
appliances and four fans in QLS450, QLS650, and QLS800 appliances.
Important - When removing a failed cooling fan unit, Check Point recommends
that you complete the procedure within 3 minutes to avoid a temporary impact on
performance.
If you require additional time, Check Point recommends that you shut down the
appliance beforehand.
QLS250 Appliance Rear Panel
QLS250, QLS450, QLS650, and QLS800
in:
Installing and Removing Fans in Check Point Appliances | 6